Detailed Help on Inserting HTML Tags!

If you are having problems with HTML in general, please go to the A Beginner's Guide to HTML. It has a lot of information for writing HTML documents.

The HTML code to place your FreeVisits "Intellistitial code" onto your web site may be obtained with the "Get HTML Code" command in the Control Center of FreeVisits.

Always use a browser and verify any changes you make to your web page.

1. Using Plain Text Editors
2. Using Netscape Composer
3. Using Netscape Gold
4. Using AOL Personal Publisher Version 2
5. Using AOL Press
6. Using FrontPage
7. Using Page Mill
8. Using Web TV
9. Using WebSpawner
10. Using Other HTML editors

1. Plain Text Editors

   Here are directions for inserting your FreeVisits HTML code using a plain text editor:

   1. Start an authoring tool (e.g. Notepad) and Open the source code for your web page.
   2. Copy and Paste* your FreeVisits HTML code and Save the file.
   3. If your web page is on a remote server, upload the changes to the server.

   *Copying is a standard function which almost all Windows and Mac applications have. To Copy, highlight the text using the mouse and choose Edit from the menu bar at the top and then select Copy (Ctrl C). To Paste, place the cursor where you want to begin the FreeVisits HTML code and select Edit then select Paste (Ctrl V).

   If you are having problems with submitting your changes, perhaps you are having permissions problems. Check with your system administrator for help with updating your web page.

   ---

2. Netscape Composer

   Here are directions for inserting your FreeVisits HTML code using Netscape Composer:

   1. On the menu bar, choose Edit | Preferences
   2. Choose Composer | Publishing
   3. Uncheck Maintain links and Keep images with page
   4. Click OK
   5. On the menu bar, choose Insert | HTML Tag
   6. Paste* the FreeVisits HTML code exactly as it was given to you.

      IMPORTANT! Make sure the cursor is flush against the end of the FreeVisits HTML code with no spaces or linebreaks. This editor is extremely picky. If the cursor is not flush against the end of the FreeVisits HTML code, you'll get a Premature close of tag error message.

   7. Click OK

   That's it. You should see a yellow link symbol appear. If you preview the page, you should see the form. If you are using Netscape to publish your site, please remember to click Select None under Publish.

   *Copying is a standard function which almost all Windows and Mac applications have. To Copy, highlight the text using the mouse and choose Edit from the menu bar at the top and then select Copy (Ctrl C). To Paste, place the cursor where you want to begin the FreeVisits HTML code and select Edit then select Paste (Ctrl V).

   ---

3. Netscape Gold

   Here are directions for inserting your FreeVisits HTML code using Netscape Gold:

   1. On the menu bar, choose Options | Editor Preferences
   2. Click the Publish tab
   3. Uncheck Maintain links and Keep images with page
   4. Click OK
   5. On the menu bar, choose Insert | HTML Tag
   6. Paste* the FreeVisits HTML code exactly as it was given to you.

      IMPORTANT! Make sure the cursor is flush against the end of the FreeVisits HTML code with no spaces or linebreaks. This editor is extremely picky. If the cursor is not flush against the end of the FreeVisits HTML code, you'll get a Premature close of tag error message.

   7. Click OK

   That's it. You should see a yellow link symbol appear. If you preview the page, you should see the form. If you are using Netscape to publish your site, please remember to click Select None under Publish.

   *Copying is a standard function which almost all Windows and Mac applications have. To Copy, highlight the text using the mouse and choose Edit from the menu bar at the top and then select Copy (Ctrl C). To Paste, place the cursor where you want to begin the FreeVisits HTML code and select Edit then select Paste (Ctrl V).

   ---

4. AOL Personal Publisher Version 2

   Here are directions for inserting your FreeVisits HTML code using AOL Personal Publisher Version 2:

   1. Go to Personal Publisher
   2. Select Edit Page
   3. Click the HTML button on the Add Contents Box.
   4. Paste* the FreeVisits HTML code into the Free-From HTML box.
   5. Click OK
   6. Then click on View
   7. Finally click on Publish after you see the form.

   Remember that you can always revert to the backup file if your page becomes too messed up to handle.

   *Copying is a standard function which almost all Windows and Mac applications have. To Copy, highlight the text using the mouse and choose Edit from the menu bar at the top and then select Copy (Ctrl C). To Paste, place the cursor where you want to begin the FreeVisits HTML code and select Edit then select Paste (Ctrl V).

   ---

5. AOL Press

   Here are directions for inserting your FreeVisits HTML code using AOL Press:

   1. Launch AOL Press.
   2. Click on Tools
   3. Select Show HTML (It is in this mode where you should Copy and Paste* the FreeVisits HTML code)
   4. Make sure you Paste the FreeVisits HTML code after the <BODY > tag and before the </BODY> tag.

   Remember that you can always revert to the backup file if your page becomes too messed up to handle.

   *Copying is a standard function which almost all Windows and Mac applications have. To Copy, highlight the text using the mouse and choose Edit from the menu bar at the top and then select Copy (Ctrl C). To Paste, place the cursor where you want to begin the FreeVisits HTML code and select Edit then select Paste (Ctrl V).

   ---

6. FrontPage

   Here are directions for inserting your FreeVisits HTML code using FrontPage:

   1. Open your HTML document.
   2. Place the Insertion Point at the location you want your link or where you would like to enter your FreeVisits HTML code.
   3. Select INSERT from the menu bar.
   4. Select HTML MARKUP
   5. Enter your FreeVisits HTML code (Complete with brackets, etc.) NOTE: You must type in the FreeVisits HTML code manually (you cannot Copy and Paste)!
   6. Press OK.

   This should insert the FreeVisits HTML code into your page. Please note that it won't show the FreeVisits form unless your network connection is active!

   ---

7. Page Mill

   Here are directions for inserting your FreeVisits HTML code using Page Mill:

   1. Place the cursor where you want to place the FreeVisits HTML code and type <!--NOEDIT-->
   2. Select Edit | Paste
   3. Type <!--/NOEDIT--> after the FreeVisits HTML code.
   4. Now Save your document and FTP or upload it to your server (if necessary).

   Make sure the FreeVisits HTML code is placed after the <BODY > tag and before the </BODY> tag.

   ---

8. Web TV

   Here are directions for inserting your FreeVisits HTML code using Web TV:

    

   1. Place the cursor where you want to begin the FreeVisits HTML code.
   2. Type in your FreeVisits HTML code.
   3. Save your document and submit it for publishing online.

   IMPORTANT! Make sure the FreeVisits HTML code is placed after the <BODY > tag and before the </BODY> tag. You must write down your FreeVisits HTML code on a piece of paper from the List Owner Control Center. Make sure that you write it down accurately. Make sure it is correct and without any typos as they will change the function of the FreeVisits HTML code. If you don't see the form or your page doesn't look right, your FreeVisits HTML code is probably in between the wrong tags, so go back and move the FreeVisits HTML code either higher or lower on the page.

   ---

9. WebSpawner

   Here are directions for inserting your FreeVisits HTML code using WebSpawner:

   1. Go to Create Web Page (or Modify Webpage if you already have one)
   2. Place the cursor where you want to place the FreeVisits HTML code and type <!-- begin -->
   3. Paste* the FreeVisits HTML code.
   4. Type <!-- end --> after the FreeVisits HTML code.

   *Copying is a standard function which almost all Windows and Mac applications have. To Copy, highlight the text using the mouse and choose Edit from the menu bar at the top and then select Copy (Ctrl C). To Paste, place the cursor where you want to begin the FreeVisits HTML code and select Edit then select Paste (Ctrl V).

   ---

10. Other HTML editors

    Here are directions for inserting your FreeVisits HTML code using other HTML editors:

    1. Remember to save a backup of your HTML file before editing.
    2. There should be an option to Insert HTML or View HTML. It is in this mode that you want to Copy and Paste the FreeVisits HTML code.
    3. To Copy, highlight your FreeVisits HTML code using the mouse and Select Edit then select Copy*
    4. After you've decided on where to insert the FreeVisits HTML code, place the cursor where you want to begin the FreeVisits HTML code and select Edit then select Paste*

    *Copying is a standard function which almost all Windows and Mac applications have. To Copy, highlight the text using the mouse and choose Edit from the menu bar at the top and then select Copy (Ctrl C). To Paste, place the cursor where you want to begin the FreeVisits HTML code and select Edit then select Paste (Ctrl V).